Page-32 All Products - Forged Flanges,Carbon Steel Flanges,A105 Flanges,Alloy Steel Flanges,Hot Forgings,Welding Neck Flanges

Hot forging process of welding neck flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Hot forging process of welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe...

Contact Now

Hot carbon steel weld neck flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

Hot carbon steel weld neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges....

Contact Now

Factory lowest price a threaded flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Factory lowest price a threaded flange Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes and...

Contact Now

ANSI B16.5 Class 900 THREADED Flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

ANSI B16.5 Class 900 THREADED Flanges A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress...

Contact Now

3" threaded flange foreign

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: carbon steel

3" threaded flange foreign Screwed or Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes and at...

Contact Now

Stainless steel FF blind B16.5 flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Stainless steel FF blind B16.5 flange A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be...

Contact Now

Alloy steel aluminum forging flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Alloy steel aluminum forging flange Product description: ANSI B16.5 alloy steel flange Factory price of alloy steel aluminum Welding neck A182F22 flange ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange,...

Contact Now

Socket Welding casting RF flange F304/F304L

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

Socket Welding casting RF flange F304/F304L Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID of matching...

Contact Now

HG20592 WN PN16 DN80 flamge

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: HG20592

HG20592 WN PN16 DN80 flamge Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges. Weld...

Contact Now

Carbon steel lap joint flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: B16.5

Carbon steel lap joint flange A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs...

Contact Now

Welding neck class900 RTJ flange B16.5

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

6“welding neck class900 RTJ flange B16.5 RTJ forged flanges standard Class 900 RTJ flange ANSI B16.5 RTJ ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded...

Contact Now

Hot forging structure RF welding neck flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: carbon steel

Hot forging structure RF welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe...

Contact Now

2" class 150 welding neck flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

2" class 150 welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges....

Contact Now

Factory lowest price Flange welding neck

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

Factory lowest price Flange welding neck Welding neck forging techniques AMSE B16.47-A FLANGE welding flange Hot forming vs machining Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself....

Contact Now

Carobn steel flange A105N B16.5

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: carbon steel

Carobn steel flange A105N B16.5 Carbon steel DN 15 to 600 Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom...

Contact Now

Class 1500 RTJ stainless steel flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

Class 1500 RTJ stainless steel flange Stainless stell RTJ flange RTJ Class150 to 2500 ASME FLANGE B16.47-A FLANGE RTJ flange ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose...

Contact Now

8``slip-op alloy steel flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Alloy forged steel material Alloy flange forging process 8‘’slip-op alloy steel flange Slip on weld fange can be slid onto a pipe and then welded in place. It is made of carbon steel, alloy steel, and stainless steel. The industrial processes come into die forging,and machining, we can provide a wide range of slip on...

Contact Now

16" slip-on alloy steel

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

16" slip-on alloy steel Alloy steel flange price list Pn400 flange dimensions ANSI B16.47 alloy steel ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded...

Contact Now

Complete variety of flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Complete variety of flanges Raised face flange Small stainless steel pressure vessel Classification of pressure vessels ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose...

Contact Now

Factory forged standard carbon steel raised face flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: NC002

Factory forged standard carbon steel raised face flanges On the one side rise a part,usually used the end of pipe,line, and other construction,there is standard unspecific and also be made customly. ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind...

Contact Now

Class300 Slip On Flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: Slip On Flange

Class300 JIS flange Slip On Flange Our ring roller machine can produce No. 8 specifications above 150# and 300#600#, so the price is very competitive. In the B16.5 standard, slip on flanges are the most common and popular flanges. ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard...

Contact Now

B16.5 BUTT WELDING FLANGE

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5 FLANGE

ASME flange B16.5 flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework systems.It is the machinery, petroleum, chemical, water, electricity, shipbuilding sectors piping systems and devices most widely used pipe fittings. ASME flange include B16.5, B16.47-A , B 16.47-B, this...

Contact Now

CL900 SW RTJ flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

CL900 SW RTJ flange Alloy or stainless steel flange ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange...

Contact Now

SPECTACLE BLIND RF CLASS 150

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: Alloy steel

SPECTACLE BLIND RF CLASS 150 Alloy steel spectacle blind Hot forging temperature ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice...

Contact Now