 HomeProductsSteel FlangeStainless Steel Flange

Stainless Steel Flange

(Total 70 Products)

 

Butt Weld Pipe Flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

SAE Flanges is a range of high pressure hydraulic flange which is made in accordance to SAE J518 standards. The acronym SAE stands for Society of Automotive Engineers. The industrial processes come into die forging,and machining,we can provide a...

Contact Now

SAE Flange Socket weld flange butt weld flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Contact Now

Socket weld stainless steel pipe flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Socket-weld pipe flanges are typically used on smaller sizes of high pressure pipes. These flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the...

Contact Now

1.5 inch weld neck 316 stainless steel flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Weld neck pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for weld neck pipe flanges, the standard height is 1/16" for weld neck pipe flanges under 400#. For weld neck pipe flanges of...

Contact Now

AWWA stainless steel lap joint flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

This standard covers slip-on and blind flanges for waterworks service in sizes 4" through 144" nominal (100mm through 3600 mm). The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld...

Contact Now

ASME standard forged steel welding neck pipe flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Pipe flanges that are made to standards called out by ASME B16.5 or ASME B16.47, and MSS SP-44. They are typically made from forged materials and have machined surfaces. ASME B16.5 refers to nominal pipe sizes (NPS) from ½" to 24". B16.47 covers...

Contact Now

PN16/2 WELD NECK FLANGE SCHEDULE 316L STAINLESS STEEL

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

316 is the 2nd most common stainless after 304 and is commonly used in food and surgical applications. The addition of moly prevents specific forms for corrosion. By keeping the carbon at .03% max, it has been shown to minimize carbide precipitation...

Contact Now

150LB SLIP-ON flange 316L stainless steel

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K...

Contact Now

Stainless steel BL(blind) FF flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

Blind Flange can be slid onto a pipe and then welded in place. It is made of carbon steel, alloy steel, and stainless steel. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following...

Contact Now

F304 stainless steel blind FF flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

F304 stainless steel flange blind FF flange ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange),...

Contact Now

14" slip-op stainless steel

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

14" slip-op Stainless Steel Flange Stainless Steel DN350 Flange CLASS 300 DN350 Stainless Steel Flange ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange,...

Contact Now

Large diameter flange weights

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Large diameter flange weights ASME B16.47-A Flange large diameter flange Stainless Steel Flange class150 ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange , this standard system include slip on flange, blind flange, welded neck...

Contact Now

Welding neck stainless steel F304/F304L flange RF

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

Welding Neck Stainless Steel Flange ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket...

Contact Now

B16.5 stainless steel spectacle blind dimensions

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

B16.5 Stainless Steel Flange spectacle blind dimensions ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose...

Contact Now

ANSI B16.5 Lap Joint Flanges

Brand: NC

Packaging: PLYWOOD

Supply Ability: 12,000Ton/Year

Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability is little, if any, better...

Contact Now

Stainless steel FF blind B16.5 flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Stainless steel FF blind B16.5 flange A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the...

Contact Now

Socket Welding casting RF flange F304/F304L

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Socket Welding casting RF flange F304/F304L Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as...

Contact Now

Class 1500 RTJ stainless steel flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Class 1500 RTJ stainless steel flange Stainless stell RTJ flange RTJ Class150 to 2500 ASME FLANGE B16.47-A FLANGE RTJ flange ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind...

Contact Now

CL900 SW RTJ flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

CL900 SW RTJ flange Alloy or stainless steel flange ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose...

Contact Now

Class 600 blind flange dimensions in mm

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ASME flange (American National Standards Institute) include ASME B16.5 flange, ASME B16.47-A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose...

Contact Now

Reducing Froged Flanges 150LB to 2500LB

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose...

Contact Now

Plate Flange Class 150 to 2500

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose...

Contact Now

China Stainless Steel Flange Suppliers

Flanges made by stainless steel material.

Stainless steel, a alloy steels usually containing 10 to 30 percent chromium. along with low carbon content, chromium imparts remarkable resistance to corrosion and heat. Other elements, such as nickel, molybdenum, titanium, aluminum, niobium, copper, nitrogen, sulfur, phosphorus, or selenium, may be added to increase corrosion resistance to specific environments, enhance oxidation resistance, and impart special characteristics.

There are 4 types of stainless steel materia:austenitic stainless steel like A182

F304/304L/304H/310/316/316L/321/347..., Ferritic stainless steel like A182 F429/430..., Duplex stainless steel like A182 F50/51/52/53...., Martensitic stainless steel like F182 F6...

 Home > Products > Steel Flange > Stainless Steel Flange