Page-15 All Products - Forged Flanges,Carbon Steel Flanges,A105 Flanges,Alloy Steel Flanges,Hot Forgings,Welding Neck Flanges

Engineering with long blind flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5

Engineering with long blind flange A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be...

Contact Now

Stainless steel lap Joint

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: Stainless steel lap Joint

Stainless steel lap Joint A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs...

Contact Now

150# 2" Socket Welding

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: Socket Welding

150# 2" Socket Welding Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID of matching pipe. The industrial...

Contact Now

PN150 DN 200 Slip-On

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: DN 200 Slip-On

ASME FLANGE B16.5 FLANGE PN150 DN 200 Slip-On Slip on pipe steel flange actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the...

Contact Now

Custom Zinc Plated Socket Welding Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: NC11

STEEL FLANGE ASME FLANGE B16.5 FLANGE Socket weld flange simplified as SW flange, it has a recessed area (like a shoulder) in the flange bore, this shoulder serves as a guide to set the depth of the pipe that inserted to the flange. The industrial processes come into die forging,and machining,we can provide a wide...

Contact Now

Yellow Painting A105 Flanges

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: ANSI B16.5 WN, SO

Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. The industrial processes come into die forging,and machining,we can provide a wide range...

Contact Now

B16.5 Forged Steel Flange

Brand: NC

Packaging: Plywood cases

Supply Ability: 12000TON/YEAR

Min. Order: 1 Ton

Model No.: 300LB 20"

B16.5 WN RTJ Flange ASTM A182 F5 Alloy Steel A182F5 alloy steel flanges have a better mechenical properties and anti-rust than normal carbon steel flanges. It always used in heavy duty pipe and vessels. Ring type joint face accompany with seal rings to make pipe be much safer in leak-proofness. The industrial...

Contact Now

Raised Face Slip On Flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5 150# Slip On Flanges SO

Slip on flange is a very common and popular steel flange in our daily production. Our ring roller machines can produce slip on flanges from 8" to 48" with standard B16.5 and BS3293. Popular material for this flange include A105, A350LF2, A182F11/22, A182F304/316.. The industrial processes come into die forging,and...

Contact Now

Normalized B16.5 A105 Forged WN Flanges

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5 600LB WNRF

Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. Our screw press machines can produce welding neck from 2" to 6" from 150lb to 2500lb, and...

Contact Now

P245GH Forged Valve End Flange

Brand: NC

Packaging: PLYWOOD

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: DN200

This forging is a end flange which commonly used in district-heating section. P245GH Forged Valve end flange Blind flanges are used to blank off the ends of piping, valves and pressure vessel opening. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the...

Contact Now

API Ball Valve Part Body Closure

Brand: NC

Packaging: Plywood cases

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: 6"

API Ball Valve Part Body Closure The product is a part of API6D ball valve. it is forged with material A350LF2. which has a good properties under low temperature. Two body closures used together with a valve body. The industrial processes come into die forging,and machining,we can provide a wide range of...

Contact Now

A105 carbon steel flanges and fittings

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: NC008

American standard forged flanges ,use of the material number is A105,for pipe connecting and other use. Production Process is forging and lathe. The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN...

Contact Now

ASME A105 carbon steel forged flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: NC007

A105 is the American ASTM standard number, and A stands for ordinary carbon structural steel. Carbon steel forgings for pipe parts. Because this standard only specifies a carbon steel forging, A105 is also a forging carbon steel grade. A105 is also a material code, belonging to special steel, is a cold forged steel....

Contact Now

Customized ANSI B16.5 stainless steel lap joint flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: NC004

Customized ANSI B16.5 stainless steel lap joint flanges STEEL FLANGE ASME FLANGE B16.5 FLANGE The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS...

Contact Now

A/SA350-LF2 CL1 / CL2 low-temperature flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: CS-02

ASTM A350 (also known as ASME SA350) covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing.The industrial processes come into die forging,and machining,we can provide a wide...

Contact Now

DIN 2633 Welding Neck Fianges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: DIN 2633 PN16 DN100 Welding Neck Flanges

Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. The industrial processes come into die forging,and machining,we can provide a wide range...

Contact Now

Forged Steel A105 Flanges

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: WN flange

Painting for flanges In order to protect flanges from rusting, after machining, all surface of flanges will be dealed with anti-rust treatment. The treatment includes anti-rust oil, yellow painting, blue painting, black painting... The industrial processes come into die forging,and machining,we can provide a wide...

Contact Now

12" SLIP-ON flange foreign

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.47

ASME flange B16.47-A flange 12" SLIP-ON flange foreign ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose flange), socket...

Contact Now

AWWA C207 Class D Flanges

Brand: NC

Packaging: PLYWOOD

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: 60" 125 AWWA CLASS D HUB-TYPE SLIP ON A105

The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange and JIS Flange 10K SOH Flange. ASME Flange include ASME B16.5 Flange,...

Contact Now

B16.5 300lb Blue Paiting Welding Neck Flanges

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: B16.5 300# 12" WN RF flanges

The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange and JIS Flange 10K SOH Flange. ASME Flange include ASME B16.5 Flange,...

Contact Now

ANSI/ASME B16.5 Slip On Pipe Flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Min. Order: 1 Ton

Model No.: Forged A105 Slip On Pipe Flanges

ASME Flange include ASME B16.5 Flange, ASME B16.47-A Flange, ASME B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special flange, sizes from 1/2...

Contact Now

High Quality Carbon Steel A105 Threaded Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: B16.5 150# Threaded NPT Flanges

ASME Flange include ASME B16.5 Flange, ASME B16.47-A Flange, ASME B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special flange, sizes from 1/2...

Contact Now

B16.5 Forged Piping Steel Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: B16.5/B16.47

Flanges are a kind of very popular component for pipeline. The forged steel piping flanges in our factory include B16.5, EN1092-1, DIN, JIS....with material cs, ss, as. The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange,...

Contact Now

EN1092 Type 11 Welding Neck Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Min. Order: 1 Ton

Model No.: Forged A105 EN1092 Type 11 Welding Neck Flanges

Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. Our screw press machines can produce welding neck from 2" to 6" from 150lb to 2500lb, make...

Contact Now