New Century Forging Co., Ltd
86-351-5270488
Product Categories
(Total 12 Products for Carbon Steel Dn 15 To 600)
Carobn steel flange A105N B16.5
Carobn steel flange A105N B16.5 Carbon steel DN 15 to 600 Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom...
2 inch galvanized flange Screwed or Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes and at...
FLANGE SW RF ASTM A350 LF2 Carbon steel A350 LF2 flange Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID...
ASTM A105 BLRF ASME B16.5 NACE
ASTM A105 BLRF ASME B16.5 NACE ASTM A105 carbon steel flange ASTM A105 CLASS 600 Blind flanges are used to blank off the ends of piping, valves and pressure vessel opening. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed of all...
Carbon steel socket welding ANSI B16.47 socket flange Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID of...
JIS carbon steel slip-on flange
JIS carbon steel slip-on flange DN15~600 carbon flange product description: 1. Manufacturing standard: JIS 2. Pressure rating: 150LB~2500LB; 3. Product material: F304, F316 A105, A350LF2, A182F11 ETA. 4. Production process: blanking-forging-heat treatment-machining-surface treatment-plastic box packaging 5. Product...
Blind FF flange ASME 16.5 A105N
Blind FF flange ASME B16.5 Flange Steel Flange ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and...
Forged steel class 600# threaded flanges
Threaded flange is a type of flange that has taper pipe threads conforming to ASME B1.20.1 in its bore and can be used in piping systems where it is not possible to carry out welding of flange on to the pipe such as highly explosive areas where welding can create a potential hazard. The threaded flange is screwed on...
Stainless steel welding neck flange
Stainless steel welding neck flange ANSI B16.5 stainless flange Class 600 welding neck Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of...
Class 600 alloy steel slip-op flange
Class 600 alloy steel slip-op flan F304 ally steel flange Alloy steel flange material 1. Manufacturing standards: ASME B16.5; B16.47A, B 2. Pressure rating: 150LB~2500LB; 3. Product material: F304, F316 4. Production process: blanking-forging-heat treatment-machining-surface treatment-plastic box packaging 5. Product...
Stainless steel SO (slip-on) RF flange
Stainless steel SO (slip-on) RF flange Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on pipe...
Class 600 socket welding RF forging flange
Class 600 socket welding RF forging flange Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID of matching...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
