New Century Forging Co., Ltd
86-351-5270488
Product Categories
(Total 12 Products for Awwa C207 Cs Flanges)
AWWA C207 carbon steel forged flanges
Awwa C207 Class D Slip On Flange is commonly used in waterworks, slurry, waste water, plant piping or other light duty applications. Generally, the required pressure for the Awwa C207 Class B Blind Flange is less than 300 psi. Pressure ratings for Awwa C207 Flange Material can range from the Class B flange, which...
The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange and JIS Flange 10K SOH Flange. ASME Flange include ASME B16.5 Flange,...
AWWA stainless steel lap joint flanges
This standard covers slip-on and blind flanges for waterworks service in sizes 4" through 144" nominal (100mm through 3600 mm). The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573...
API 6A Stainless Steel Orifice Flange
Duplex stainless steel Orifice flange also referred to as ORFF in its abbreviated form, are components used for metering the volumetric flow rate of liquids and gasses that are being transported through a pipe. When two Orifice Flange Jis 16k are used together, they are known an orifice flange union. The range of...
AWWA C207 Steel Pipe Flanges For Water Project
AWWA C207-18 STEEL PIPE FLANGES FOR WATERWORKS SERVICE—SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) This standard describes ring-type slip-on flanges and blind flanges. The flange pressure limits and the tables that describe them are
Ring-type, slip-on flanges (see Tables 2, 3, and 4).Blind flanges (see Table...
Class D HUB S/O FLANGES AWWA C207
The industrial processes come into die forging,and machining,we can provide a wide range of AWWA flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange and JIS Flange 10K SOH Flange. AWWA C207 flange is a type of flange...
AWWA Standard Flanges Products
ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose flange), socket welded flange, Orifice Flanges, long weld neck flange...
Standard Carbon Steel Long Weld Neck Flanges
Long welding neck flanges are on the base of B16.5 welding neck flanges but longer length, the length of the flange can be increased if an offset attachment is needed on the heads or vessel shells. The industrial processes come into die forging,and machining,we can provide a wide range of B16.5 flanges,following on...
We can produce JIS B2220 5K standard flanges by ring roller machines to reduce cost and improve quality. The material for JIS 5K 550A SOP flanges is A105, other materials are also available. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on...
Carbon Steel SA105N Pipe Flanges
The difference between ASTM A105 flange and ASTM A105N flange? N of A105N refers to normalizing, which is a kind of heat treatment procedure for A105 forgings. A105N flanges have better internal structure in material, and better mechanical properties. it's not a mandatory requirement, but according to client's...
4" Tapped 1-1/2" NPT Blind Flange Class600 A/SA105
Blind flange with 1/2 NPT tapped thread, these include NPT tapped holes and special threads to allow pressure test connections to be fitted. Blind flanges are generally used to blank off the ends of pipe. They are also used on similar valves and pressure vessel openings. Because they are often located at the ends of...
Forged 150#/300#/600#/1500#/2500# Welding Neck Flanges
B16.5 forged 150#/300#/600#/900#/1500#/2500# welding neck flanges are most common and popular products in our daily production. The material for them are usually A105, A350 LF2, A182 F11/22/304/304L/316/316L, A694 F52/60/65 The industrial processes come into die forging,and machining,we can provide a wide range of...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
