New Century Forging Co., Ltd
86-351-5270488
Product Categories
(Total 12 Products for Awwa C207 Class E Hub Flanges)
AWWA C207 Steel Pipe Flanges For Water Project
AWWA C207-18 STEEL PIPE FLANGES FOR WATERWORKS SERVICE—SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) This standard describes ring-type slip-on flanges and blind flanges. The flange pressure limits and the tables that describe them are
Ring-type, slip-on flanges (see Tables 2, 3, and 4).Blind flanges (see Table...
The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange and JIS Flange 10K SOH Flange. ASME Flange include ASME B16.5 Flange,...
AWWA stainless steel lap joint flanges
This standard covers slip-on and blind flanges for waterworks service in sizes 4" through 144" nominal (100mm through 3600 mm). The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573...
AWWA C207 carbon steel forged flanges
Awwa C207 Class D Slip On Flange is commonly used in waterworks, slurry, waste water, plant piping or other light duty applications. Generally, the required pressure for the Awwa C207 Class B Blind Flange is less than 300 psi. Pressure ratings for Awwa C207 Flange Material can range from the Class B flange, which...
API 6A Stainless Steel Orifice Flange
Duplex stainless steel Orifice flange also referred to as ORFF in its abbreviated form, are components used for metering the volumetric flow rate of liquids and gasses that are being transported through a pipe. When two Orifice Flange Jis 16k are used together, they are known an orifice flange union. The range of...
Class D HUB S/O FLANGES AWWA C207
The industrial processes come into die forging,and machining,we can provide a wide range of AWWA flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange and JIS Flange 10K SOH Flange. AWWA C207 flange is a type of flange...
AWWA Standard Flanges Products
ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose flange), socket welded flange, Orifice Flanges, long weld neck flange...
Painting for flanges In order to protect flanges from rusting, after machining, all surface of flanges will be dealed with anti-rust treatment. The treatment includes anti-rust oil, yellow painting, blue painting, black painting... The industrial processes come into die forging,and machining,we can provide a wide...
ASME B16.5 Class 150 Lap Joint Flanges
ASME Flange include ASME B16.5 Flange, ASME B16.47-A Flange, ASME B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special flange, sizes from 1/2...
ASME B16.5 Class300 SO RF flanges
ASME flange (American National Standards Institute) include ASME B16.5 flange, ASME B16.47-A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, Orifice Flanges, long weld neck flange...
Class 150# Special Blind Flanges
Class 150# Special Spectacle Blind Flanges steel flange ASME flange B16.48 flange Standard B16.48 or API 590 refers to Steel line blanks, there are 3 types: Figure 8 blanks, paddle Spacer and Blanks. They can be produced by forging or by plate-cutting. Spacer and Blank usually have tie bar for lifting or handling...
Non-Standard Class 2500# Orifice Flanges
ANSI B16.36 Orifice Flanges Orifice flanges are intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tappings are machined into the orifice flanges, making separate orifice carriers or tappings in the pipe wall unnecessary. Orifice flanges are...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
