New Century Forging Co., Ltd
86-351-5270488
Product Categories
(Total 12 Products for Alloy Steel Lwn Rf)
Alloy steel long welding neck flange
Alloy steel long welding neck flange The industrial process come into die forging and machining, we can provide a wide range of flanges, following on standards like ASME B16.5 flange, ASME B16.47 A&B flange, DIN2631 welding neck flange, JIS 5K SOP and 10K SOH flange. ASME flange include B16.5, B16.47 A&B...
6IN 300 Orifice Flange Dimensions
Product Introduction: 1. Manufacturing standards: ASME B16.36 ; 2. Pressure grade: Class300-Class2500; 3.Manufacturing range:DN25- DN650 4. Product materials: A105, 20, Q345 (B), 16mn, Q235, A516 Gr70,A350 LF2,A694 F52, A694 F60, A694 F65, A694 F70; 5. Production process: blanking-forging-heat...
Alloy steel welding neck RF flange
Alloy steel welding neck RF flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges....
3" socket welding flange foreign
3" Socket Welding Flange Steel Flange ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special...
Alloy steel lap joint casting flange RF
Alloy Steel Flange RF A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs should...
Forging machine slip-on RF A182 F11 flange
Hot Forging machine slip-on RF A182 F11 Steel Flange ASME Flange include B16.5 Flange, B16.47-A Flange, B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange...
Welding neck alloy steel (RF) A182F11 flange
Welding neck alloy steel （RF) A182F11 flange High-neck flanges: Compared with butt-welded flanges, the welding workload is large, the welding rod consumption is high, and it cannot withstand high temperature and pressure, repeated bending and temperature fluctuations, but it is more convenient to install on site and...
3/4" threaded flange casting foreign RF
3/4" threaded flange casting foreign RF Steel Flange Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller...
Alloy steel socket welding (SW) RF flange forging
Alloy steel socket welding (SW) RF flange forging Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID of...
Alloy steel A182 F11 slip-on (SO)RF flange
Alloy steel A182 F11 slip-on (SO)RF flange Slip on flange can be slid onto a pipe and then welded in place. It is made of carbon steel, alloy steel, and stainless steel. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME...
Socket welding and Slip-on alloy steel flange RF
Socket welding and Slip-on alloy steel flange RF Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same ID of...
ASME B16.5 Class300 SO RF flanges
ASME flange (American National Standards Institute) include ASME B16.5 flange, ASME B16.47-A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, Orifice Flanges, long weld neck flange...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
