Page-3 China Steel Pipe Flanges,Carbon Steel Lap Joint Flanges,Carbon Steel Meterial Flanges Supplier

10in Slip-op Carbon Steel Flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

10"slip-op carbon steel Carbon steel DN250 flange ANSI B16.5 DN250 flange Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip...

Contact Now

150# B16.5 Forged Flange

Brand: NC

Packaging: Plywood cases

Supply Ability: 20,000Ton/Year

B16.5 WN RF Flange ASTM A105 Carbon Steel Flange A105 steel flanges have a better mechenical properties It commonly used in pipe and vessels. Raised face protected by plastic cap. The industrial processes come into die forging,and machining,we can...

Contact Now

Carbon steel forged fittings and flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

A flange is defined as a plate type device, normally round, that is attached to the end of a pipe, fitting, valve or other object to facilitate the assembly and dis-assembly of a piping system. The industrial processes come into die forging,and...

Contact Now

2 inch galvanized flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

2 inch galvanized flange Screwed or Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed...

Contact Now

3" Slip-On flange foreign

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

3" Slip-On flange foreign ASME Flange B16.5 Flange Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are...

Contact Now

Forged black paint socket welding flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Socket Welding Flanges STEEL FLANGE ASME FLANGE B16.5 FLANFE The socket welding flange is similar to a slip-on flange except it has a bore and a counterbore dimension.The counterbore is slightly larger than the O.D. of the matching pipe,allowing the...

Contact Now

Galvanized forged carbon steel welding neck flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Welding Neck Flange The welding neck flange is normally to as the “high hub” flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange.The welding neck flanges is the best designed...

Contact Now

Forged B16.5 carbon steel flange

Brand: NC

Packaging: Plywood cases

Supply Ability: 12,000TON/YEAR

B16.5 WN RF Flange ASTM A105 Carbon Steel Flange A105 steel flanges have a better mechenical properties It commonly used in pipe and vessels. Raised face protected by plastic cap. The industrial processes come into die forging,and machining,we can...

Contact Now

Anti-rust Oil Welding Neck Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Class 1500 ring joint welding neck flange Ring type joint flanges are typically usded for high pressure projects. They provide a more effective sealing solution to media critical pipeline and pressure vessel infrastructure. Ring joint face is...

Contact Now

Forged Non-standard General Pipe Connecting Projects Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Besides standard steel flange carbon steel flange, we also can produce non-standard and special shape flanges or forgings according to clients' drawings for different application. The industrial processes come into die forging,and machining,we can...

Contact Now

Class 150# Special Blind Flanges

Brand: NC

Packaging: PLIWOOD CASES

Supply Ability: 12,000TON/YEAR

Class 150# Special Spectacle Blind Flanges steel flange ASME flange B16.48 flange Standard B16.48 or API 590 refers to Steel line blanks, there are 3 types: Figure 8 blanks, paddle Spacer and Blanks. They can be produced by forging or by...

Contact Now

Carbon steel A105 Flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability is little, if any, better...

Contact Now

Lap joint Flange Forged Flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability is little, if any, better...

Contact Now

Forged Flange Collar Flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of the flange...

Contact Now

A694 F52 900LB 34" Flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of the flange...

Contact Now

Black paint A350LF2 forged flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

The ASTM A350 lf2 forged flange types are stronger because they are forged from one piece of metal and could be used in applications where strength is required. These flanges could also be welded with the piping system with ease. The industrial...

Contact Now

Carbon Steel SA105N Pipe Flanges

Brand: NC

Packaging: Sea-worthy plywood case/pallet

Supply Ability: 20,000Ton/Year

The difference between ASTM A105 flange and ASTM A105N flange? N of A105N refers to normalizing, which is a kind of heat treatment procedure for A105 forgings. A105N flanges have better internal structure in material, and better mechanical...

Contact Now

Blind Flat Face pipe flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Blind Flat Face pipe flanges are used to seal the end of a piping system or pressure vessel openings to prevent flow. Blind Flat Face flanges are mainly used for pressure testing the flow of liquid or gas through a pipe or vessel. Blind Flat Face...

Contact Now

Ring Type Joint gaskets

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Ring Type Joint gaskets are metallic sealing rings, suitable for high-pressure and high-temperature applications. They are always applied to special, accompanying flanges which ensure good, reliable sealing with the correct choice of profiles and...

Contact Now

Carbon steel A105 flange for chemical industry

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ASTM A105 covers forged carbon steel flange and piping components for ambient and higher-temperature service in pressure systems. It also includes pipe fittings, valves and similar parts. The maximum weight manufactured forging part follows by this...

Contact Now

Zinc plated carbon steel screwed flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

The threaded flange is similar to the slip-on flange,but the bore is threaded. Its chief merit is that it can be assembled without welding,explaining its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive...

Contact Now

Custom carbon steel slip on flanges

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Slip on pipe flanges are typically provided with a raised or flat face. When a raised face is necessary for slip on pipe flanges, the standard height is 1/16" for slip on pipe flanges under 400#. For slip on pipe flanges of 400# and up, the standard...

Contact Now

Piping Slip on Flange PT

Brand: NC

Packaging: Plywood cases

Supply Ability: 12,000TON/YEAR

B16.5 SO RF Flange ASTM A105 Carbon Steel Flange ASTM A105 flanges have a better mechenical properties It commonly used in pipe and vessels. PT Examination to avoid cracks on the surface. The industrial processes come into die forging,and...

Contact Now

PN16 forged carbon steel black slip on flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

The black carbon steel flange is used in oil and gas applications to connect pipe to the floor or a wall. This flange meets ASTM and ASME standards. The industrial processes come into die forging,and machining,we can provide a wide range of...

Contact Now

Carbon Steel Flange

China Carbon Steel Flange Suppliers