Ansi B16.47 Slip On Flange,Finely Wrought With Flange,Carbonsteel B16.47 Welding Neck Flange Manufacturers and Suppliers in China

ANSI B16.47 Welding Neck Flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ANSI B16.47 welding neck Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important...

Contact Now

10 to 8 welding neck flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Carbon Steel Flange welding neck flange ASME flange include ASME B16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose...

Contact Now

A515 B16.48 Steel Line Blanks Spacer

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 12,000Ton/Year

Standard ASME FLANGE B16.48 or API 590 refers to Steel line blanks, there are 3 types: Figure 8 blanks, paddle Spacer and Blanks. They can be produced by forging or by plate-cutting. Spacer and Blank usually have tie bar for lifting or handling...

Contact Now

B16.47A Welding Neck Flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K SOP Flange...

Contact Now

Forged carbon steel A105 Orifice Flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Orifice flange is a special flange and is always used in pairs. It is used in conjunction with orifice plate for measure flow of liquids and gases in a piping system. Orifice flanges are pre-drilled with tapped holes made in the flange rims to...

Contact Now

Lap jiont flange dimensions class 900

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at...

Contact Now

B16.47 RF CLASS 600 LAP JIONT

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

B16.47 RF CLASS 600 LAP JIONT Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability...

Contact Now

3/4" FF blind flange foreign

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

3/4" FF blind flange foreign product description: 1. Manufacturing standards: ASME B16.5; B16.47A, B 2. Pressure rating: 150LB~2500LB; 3. Product material: F304, F316, A105, A182F11, A350LF2, A182F22 4. Production process: blanking-forging-heat...

Contact Now

Slip On RF Flange B16.47 ASTM A105N

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000Ton/Year

Slip On RF Flange B16.47 ASTM A105N Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the...

Contact Now

Class 600 long weld neck flange dimensions

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ASME flange B16.47-A Flange Class 600 long weld neck flange dimensions Long weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the...

Contact Now

12" SLIP-ON flange foreign

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ASME flange B16.47-A flange 12" SLIP-ON flange foreign ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded...

Contact Now

ANSI B16.47 WN PL Series A (MSS SP44)

Brand: NC

Packaging: plywood cases&pallets

Supply Ability: 12000Ton/Year

Weld Neck Flanges are flanges that designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress applications. The neck, or hub, transmits stresses to the...

Contact Now

Asme b16.47 series a flange dimensions

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ASME B16.47- A flange Steel Flange A compact flange, similar to a swivel ring flange, is a two-piece constructed flange used extensively for offshore pipelines, offshore industry applications and onshore and sub-sea applications. Its double sealing...

Contact Now

B16.47 alloy steel blind flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

ASME B16.47-A Alloy Seel Flange A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the...

Contact Now

B16.47-A Welding Neck Flanges

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 12,000Ton/Year

Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of the flange...

Contact Now

Hot forging products of flange

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Hot forging products of flange The compact flange similar to the rotating ring flange is a two-piece construction flange, which is widely used in offshore pipelines, offshore industrial applications, and onshore and subsea applications. Its double...

Contact Now

Forged Lap Joint Flange

Brand: NC

Packaging: plywood cases and pallets

Supply Ability: 20,000 ton/year

The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K...

Contact Now

ANSI B16.47 Series A WN&BL Flanges

Brand: NC

Packaging: Sea-worthy plywood case/pallet

Supply Ability: 20,000Ton/Year

B16.47 Series A flanges are most common and popular flanges in our daily production, this standard include welding neck flanges, blind, and slip on flanges. The material for them can be carbon steel A105, A350 LF2, and stainless steel AF182...

Contact Now

Carbon steel socket welding

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Carbon steel socket welding ANSI B16.47 socket flange Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore,...

Contact Now

ASME B16.47 SERIES A FLANGE(Mss Sp44)

Brand: NC

Packaging: plywood cases&pallets

Supply Ability: 20000Ton/month

Name: ASME B16.47 SERIES A FLANGE(MSS SP44) Description: Pressure: Class150,300,600,900 Size: 26"-60"(Normal pipe size) Type:WN, BL Material: A105, Rst37.2, Stainless steel 304/316/304L/316L Processing technic: Forging Packing: Poly-wooden case or...

Contact Now

ASME B16 47 Slip On Flange Dimensions

Brand: NC

Packaging: Sea-worthy plywood case/pallet

Supply Ability: 20,000Ton/Year

For big size flanges like ASME B16.47 slip on flanges dimensions, we often produce with ring rollers to reduce the cost. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on...

Contact Now

Blind Flange Dimensions 600lb

Brand: NC

Packaging: Sea-worthy plywood case

Supply Ability: 20,000Ton/Year

The flange type is ASME B16.47 Ser. A 600# Blind with material A105. Following pls check the blind flange dimensions 600lb. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on...

Contact Now

Types of flanges welding neck

Brand: NC

Packaging: PLYWOOD CASES

Supply Ability: 12,000Ton/Year

Types of flanges welding neck The welded neck pipe flange is connected to the pipe by welding the pipe to the neck of the pipe flange. This allows stress to be transferred from the welded neck tube flange to the tube itself. This also reduces the...

Contact Now

ANSI B16.47 Ser.A WN Flange

Brand: NC

Packaging: PLYWOOD CASE

Supply Ability: 12,000TON/YEAR

The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS Flange 5K...

Contact Now

B16.47-A Flange

China B16.47-A Flange Suppliers